Dr. S. Suresh Kumar received his Ph.D. in Machine Design from the Department of Mechanical Engineering, Indian Institute of Technology Madras (IIT Madras), Chennai, in 2012. He has more than 18 years of teaching, research, and academic experience, with expertise in metal fatigue, fracture mechanics, ballistic impact analysis, computational fracture mechanics, Finite Element Analysis, and defence-related structural simulations. His research contributions include 36 peer-reviewed journal publications including several in Q1 and Q2 journals, which have collectively received over 463 citations, with an H-index of 13. He serves as the Principal Investigator (PI) for a ₹69.87 lakh competitive research project funded by the Naval Research Board (NRB), Defence Research and Development Organisation (DRDO), carried out in collaboration with the Defence Metallurgical Research Laboratory (DMRL), Hyderabad. He served as the Co-Investigator for the Department of Science and Technology (DST–Technology Systems Development Programme), Government of India-funded project titled “Reclamation of Abrasives from Bonded, Coated and Sanitary Ware Rejects.” The project, with a sanctioned budget of ₹74.16 lakhs, was successfully completed during 2016–2019 and focused on developing sustainable technologies. He is the author of the textbook Introduction to Design Thinking (McGraw Hill) and has conducted several Design Thinking workshops for students, faculty members, and industry professionals. Dr. Suresh Kumar has actively fostered industry–academia collaboration by mentoring student innovation projects that secured ₹7.0 lakhs in competitive funding from Valeo India Private Limited, Chennai, through the Valeo Innovation Challenge 2017, an international student innovation contest. He also served as the Faculty Mentor for Team SpaceKidz India, comprising students from SSN College of Engineering, which successfully qualified for and participated in the NASA Human Exploration Rover Challenge 2018 held in Huntsville, Alabama, USA. The team was one of only four teams representing India at the prestigious international competition. Most recently, he mentored Team ‘OPTIPICK’ to win First Place at the Caterpillar Tech Challenge 2026 for developing the Thermal Runaway Risk Index (TRRI), an innovative solution for assessing battery thermal runaway risk. He holds 8 granted Indian patents and 12 published patents in the areas of automotive safety, sustainable manufacturing, green technologies, mobility solutions, and advanced engineering systems. Since 2020, he has been serving as the IPR Coordinator at SSN College of Engineering (SSNCE), where he has played a key role in fostering an innovation and intellectual property ecosystem by coordinating faculty members and students in patent filing, and innovation-driven research. He has also been actively involved in preparing and coordinating institutional submissions for national innovation and ranking frameworks, including the Institution’s Innovation Council (IIC), the Atal Ranking of Institutions on Innovation Achievements (ARIIA).

Work Experience

• July 2026 – Present, Associate Professor, Department of Mechanical Engineering, Shiv Nadar University Chennai, Chennai, India.
• June 2012 – June 2026, Associate Professor, Department of Mechanical Engineering, SSN College of Engineering, Chennai, India.
• July 2007 – December 2007, Lecturer, Department of Mechanical Engineering, SASTRA University, Thanjavur, Tamil Nadu, India.
• June 2004 – April 2007, Lecturer, Department of Mechanical Engineering, Arunai Engineering College, Tiruvannamalai, Tamil Nadu, India.

Projects

1.Ongoing projects (Principal Investigator)

1. Understanding the Influence of Corrosion on the Shock Response of DMR 249A Steel Plates and Welded Joints, funded by the Naval Research Board (NRB), DRDO, Government of India, with a sanctioned amount of ₹69.87 Lakhs, being carried out during 2021–2025 (under approved extension), PI: Dr. S. Suresh Kumar, Co-PI: Dr. S. R. Koteswara Rao.

2.Ongoing project (Co-Principal Investigator)

1. SAJAY – Centre of Excellence in Prosthetics and Orthotics, funded with a total sanctioned amount of ₹53.295 Lakhs, being carried out during 2025–2028, PI: Dr. A. Kavitha, Co-Principal Investigators: Dr. M. Dhanalakshmi, Dr. G. Satheeshkumar, Dr. R. Nithya, Dr. S. Suresh Kumar, Dr. S. Pravin Kumar, and Dr. S. Saranya. Dr. S. Suresh Kumar serves as Co-PI for Product 2: STRIDE ASSIST™ Device for Assistive and Rehabilitation Purposes.

3.Completed projects (Principal Investigator)

1. 2025: S. Suresh Kumar successfully facilitated the receipt of a patent reimbursement of ₹1.68 lakhsfor SSN College of Engineering under the KAPILA (Kalam Program for Intellectual Property Literacy and Awareness) scheme of the Government of India towards patent filing and publication expenses.
2. 2019–2021:Principal Investigator, Ballistic Performance Determination of Nanopowder-Infused Polymer Composite Targets for Lightweight Personal Armour, an Internal Research Project funded by SSN College of Engineering (SSNCE) with a sanctioned amount of ₹4.50 lakhs.
3. 2017:Faculty Mentor, Innovation Design Challenge 2017, funded by Valeo India Private Limited, Chennai, with a sanctioned amount of ₹7.00 lakhs. The project focused on fostering innovation and product development through industry–academia collaboration and was successfully completed.
4. 2016:Provided consultancy services to HCL Technologies for the development of course materials in Engineering Drawing and Finite Element Analysis, for which a consultancy remuneration of ₹70,800 was received.
5. 2015–2018:Principal Investigator, Investigation on the Influence of Weld Residual Stress on the Ballistic Resistance of Straight and Curved Targets, an Internal Research Project funded by SSN College of Engineering (SSNCE) with a sanctioned amount of ₹4.25 lakhs. The project was successfully completed.

4.Completed projects (Co-Principal Investigator)

1. 2012–2015:Co-Investigator, Experimental and Finite Element Investigations of the Machining Process with Composite Materials, a research project funded by the All-India Council for Technical Education (AICTE), Government of India, with a sanctioned amount of ₹18.65 lakhs. The project was successfully completed.
2. 2016–2019:Co-Investigator, Reclamation of Abrasives from Bonded, Coated and Sanitary Ware Rejects, a research project funded by the Department of Science and Technology (DST–Technology Systems Development Programme), Government of India, with a sanctioned amount of ₹74.16 lakhs. The project was successfully completed.

Publications

(International Journals (Q1 and Q2) – 27, Scopus Journal – 10, Conferences – 15,

Books – 2)

1. S.K. Sundaram, M. Balaji, and H. Saravana Kumar, “A Critical Review on the Effect of High-Velocity Ballistic Impact Loading on the Personal Armors Used by the Soldiers,” Chinese Journal of Traumatology, Available Online, 2026. https://doi.org/10.1016/j.cjtee.2025.05.007.

2. S.Dharani Kumar, S. S. Suresh Kumar, and S. S. Kumar, “Effect of Cryogenic Treatment on Ballistic Performance of Thick Magnesium Alloy (AZ31B) Plates,” Journal of Materials Engineering and Performance, Vol. 34, No. 19, pp. 22753–22762, 2025.
3. N.M. Sukanya and S. K. Sundaram, “Investigations on Low-Velocity Ballistic Impact Behaviour of Kevlar/Epoxy Composites Reinforced with Chopped Wet-Spun Fibers Intruded with Nanofillers,” Thin-Walled Structures, Vol. 198, Art. No. 111665, 2024.
4. K.Ganesan and S. K. Sundaram, “Understanding the Influence of Environmental Conditions on the Low Cycle Fatigue Behaviour of High Strength Low Alloy (HSLA) Steel Under Air and Corrosive (3.5% NaCl) Conditions,” International Journal of Fatigue, Vol. 185, Art. No. 108340, 2024.
5. U.Magarajan and S. S. Suresh Kumar, “Experimental Ballistic Performance of Friction Stir Processed Aluminum (AA6061-B4C) Surface Composite,” Mechanics Based Design of Structures and Machines, Vol. 51, No. 5, pp. 2936–2956, 2023.
6. S.S. Suresh Kumar, A. Shyam Sundar, and R. Deepak, “Crack Shape Evolution and Stress Intensity Factors for Opposite Surface Cracks in Aircraft Shaft Under Tension and Combined Loading,” Mechanics Based Design of Structures and Machines, Vol. 51, No. 2, pp. 855–874, 2023.
7. S.Dharani Kumar and S. S. Suresh Kumar, “Effect of Heat Treatment Conditions and Cryogenic Treatment on Microhardness and Tensile Properties of AZ31B Alloy,” Journal of Materials Engineering and Performance, Vol. 32, No. 19, pp. 8786–8794, 2023.
8. U.Magarajan and S. S. Suresh Kumar, “A Comparative Study on Ballistic Behaviour of MWCNT/Graphene Reinforced Al6061 Surface Composites Fabricated via Friction Stir Processing,” Archives of Metallurgy and Materials, Vol. 68,2023.
9. S.S. Suresh Kumar, R. Sabareeswar, S. Siddharth Krishna, R. Suraj, and B. Vishal, “Failure Investigations on Low Velocity Ballistic Impact Deformation of Closed-Cell Aluminum Metal Foam Targets,” Journal of Materials Engineering and Performance, 2023.
10. S.K. Sundaram and B. AG, “Influence of Target Dynamics and Number of Impacts on Ballistic Performance of 6061-T6 and 7075-T6 Aluminum Alloy Targets,” Mechanics Based Design of Structures and Machines, Vol. 50, No. 3, pp. 993–1011, 2022.
11. S.K. Sundaram, “Experimental Ballistic Performance Determination of Friction-Stir Welded Magnesium (AZ31B) Targets,” Mechanics Based Design of Structures and Machines, Vol. 50, No. 6, pp. 1851–1871, 2022.
12. S.S. Suresh Kumar, P. Sankar, and V. K. S., “Effect of Bio-Inspired Surface Pattern (Pangolin’s Scales) and Grooved Mechanisms on the High Velocity Ballistic Performance of Aluminum 6061-T6 Targets,” Mechanics of Advanced Materials and Structures, Vol. 29, No. 25, pp. 4151–4169, 2022.
13. S.S. Kumar, P. A. Shankar, and K. L. Kumar, “Failure Investigation on High Velocity Impact Deformation of Boron Carbide (B4C) Reinforced Fiber Metal Laminates of Titanium/Glass Fiber Reinforced Polymer,” Defence Technology, Vol. 18, No. 6, pp. 963–975, 2022.
14. M.S. Nitin and S. S. Suresh Kumar, “Ballistic Performance of Synergistically Toughened Kevlar/Epoxy Composite Targets Reinforced with Multiwalled Carbon Nanotubes/Graphene Nanofillers,” Polymer Composites, Vol. 43, No. 2, pp. 782–797, 2022.
15. S.Dharani Kumar and S. S. Suresh Kumar, “Effect of Shot Peening on the Ballistic Performance of Friction Stir Welded Magnesium Alloy (AZ31B) Joints,” Journal of Materials Engineering and Performance, Vol. 31, No. 12, pp. 10294–10303, 2022.
16. N.M. Sukanya and S. K. Sundaram, “Ballistic Behaviour of Nano silica and Rubber Reinforced Kevlar/Epoxy Composite Targets,” Engineering Failure Analysis, Vol. 142, Art. No. 106845, 2022.
17. N.V. Namboothiri, P. Marimuthu, and S. S. Kumar, “Analysis of Fracture Characteristics of Thin and Thick Rim Asymmetric Spur Gear Based on Strain Energy Release Rate,” Theoretical and Applied Fracture Mechanics, Vol. 121, Art. No. 103496, 2022.
18. D.S. Kumar and S. S. Kumar, “Influence of Post Weld Cryogenic Treatment on the Ballistic Penetration Resistance of Friction Stir-Welded AZ31B Magnesium Alloy,” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 236, No. 13, pp. 7304–7318, 2022.
19. S.D. Kumar and S. S. Kumar, “Effect of Heat Treatment Conditions on Ballistic Behaviour of Various Zones of Friction Stir Welded Magnesium Alloy Joints,” Transactions of Nonferrous Metals Society of China, Vol. 31, No. 1, pp. 156–166, 2021.
20. U.Magarajan and S. S. Suresh Kumar, “Effect of Ceramic Particles Reinforcement on the Ballistic Resistance of Friction Stir Processed Thick AA6061 Surface Composite Targets,” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 235, No. 15, pp. 2782–2794, 2021.
21. S.D. Kumar and S. S. Kumar, “Numerical and Experimental Ballistic Performance of Welded Magnesium (AZ31B) Plates,” Emerging Materials Research, Vol. 9, No. 4, pp. 1217–1228, 2020.
22. S.S. Suresh Kumar and M. E. Aniruthan, “Mixed-Mode Stress Intensity Factor Estimation of Inclined Cracks in an Unnotched Round Bar,” Journal of Failure Analysis and Prevention, Vol. 19, pp. 387–393, 2019.
23. P.Sabarinathan, V. E. Annamalai, S. S. Kumar, and A. Xavier Kennedy, “A Study on Recovery of Alumina Grains from Spent Vitrified Grinding Wheel,” Journal of Material Cycles and Waste Management, Vol. 21, pp. 156–165, 2019.
24. P.M. P., “Numerical Studies on Mixed Mode Fracture Behavior of Dissimilar (AISI 304 and AA1050) Welded Joints with Multiple Cracks,” Welding in the World, Vol. 62, No. 3, pp. 565–579, 2018.
25. S.S. Kumar, H. Ashwin Clement, and R. Karthik, “Mixed Mode Fracture Analysis of Multiple Cracks in Flat and Curved Stiffened Panels of Aircraft Fuselage Structures,” Archive of Applied Mechanics, Vol. 87, pp. 1815–1828, 2017.
26. S.S. Suresh Kumar, H. Ashwin Clement, and R. Karthik, “Mixed-Mode Stress Intensity Factor Determination of Riveted Lap Joints Used in Aircraft Fuselage Structures,” Journal of Failure Analysis and Prevention, Vol. 17, pp. 780–787, 2017.
27. Y.Allwin Roy, K. Gobivel, K. S. Vijay Sekar, and S. S. Suresh Kumar, “Impact of Cutting Forces and Chip Microstructure in High-Speed Machining of Carbon Fiber-Epoxy Composite Tube,” Archives of Metallurgy and Materials, Vol. 62, No. 3, pp. 1771–1777, 2017.

1.Journal papers indexed by Scopus

1. S.K. Sundaram, K. Rahul, D. R. R. Dayal, S. Survesh, and R. Swamenathan, “Fatigue Life Estimation of Preloaded Aluminium (Al2024-T6) Aircraft Fasteners Using Finite Element Method,” Materials Today: Proceedings, Vol. 62, pp. 1369–1374, 2022.
2. N.M. Sukanya, S. K. Sundaram, and A. David, “Ballistic Performance of Nano powder Intruded Kevlar Polymeric Composite Targets,” Materials Today: Proceedings, Vol. 62, pp. 781–786, 2022.
3. S.S. Suresh Kumar and V. Naren Balaji, “Mode-I, Mode-II, and Mode-III Stress Intensity Factor Estimation of Regular- and Irregular-Shaped Surface Cracks in Circular Pipes,” Journal of Failure Analysis and Prevention, Vol. 20, pp. 853–867, 2020.
4. P.Meenachi, R. Subashini, and S. S. Kumar, “Stress Analysis of Bio ceramic Coated Orthopaedic Implants,” Materials Today: Proceedings, Vol. 5, No. 8, pp. 16610–16616, 2018.
5. U.Magarajan and S. S. Kumar, “A Review Paper on Aluminium Targets Subjected to Ballistic Loading,” Journal of Chemical and Pharmaceutical Sciences, Vol. 7, pp. 39–44, 2017.
6. S. Suresh Kumar, M. Murugan, S. Kalimuthu, and N. Balaji, “Mixed Mode Stress Intensity Factor Determination of Multiple Cracks in Hollow Circular Pipe,” Journal of Failure Analysis and Prevention, Vol. 16, pp. 555–561, 2016.
7. S.Sureshkumar, K. Sushinder, and S. Sudersan, “Finite Element Simulation of Ballistic Performance of Dissimilar Metallic Plates Welded Joints,” International Journal of Vehicle Structures and Systems, pp. 88–92, 2014.
8. S.S. Kumar, V. N. Balaji, and P. M. Prrithvi, “Influence of Residual Stress on Stress Intensity Factor Estimation of Multiple Cracks in a Dissimilar Welded Joint,” Procedia Engineering, Vol. 86, pp. 234–241, 2014.
9. S.S. Kumar, V. Veeraraghavan, M. Vimalesh, and S. B. Bharadwaj, “Mixed Mode Stress Intensity Factor Determination for Single and Multiple Cracks in an Aircraft Wing,” Applied Mechanics and Materials, Vol. 592, pp. 2528–2533, 2014.

2.Books Published

1. Salivahanan, S., Suresh Kumar, S. S., & Praveen Sam, D. (2019). Introduction to Design Thinking(1st ed.). Tata McGraw Hill Education.
2. Salivahanan, S., Suresh Kumar, S. S., & Murugesan, M. (2020). வடிவமைப்புச்சிந்தனைக்கு அறிமுகம் (Tamil ed.). McGraw Hill Education India.

3.List of granted patents

Theme1: Automotive Safety and Mobility Systems

1. S. Suresh Kumar, B. Vishal, and Neil Ashwin Raj, “Improved Escapeworthiness of Car Occupants Under Drowning Environment,”Indian Patent No. 584776, Granted on 24 March 2026, Application No. 201841030306.
2. S. Suresh Kumar, Ankit Kumar, Debal Bhattacharjee, Karthikeyan Balaji, Karthikeyan Gnanasundaram, and Krishnan Vasudevan, “Improved Passive Safety for Vehicles Using Cellular Structure in Bumpers,”Indian Patent No. 520566, Granted on 06 March 2024, Application No. 201841010364.
3. S. Suresh Kumar, A. I. B. Akshay, P. Kishore Kumar, S. Mohammad Shajeeth, and L. Mohan Kumar, “Retractable Wheels Based Dynamic Stabilizing Attachment for Motorcycle,”Indian Patent No. 490548, Granted on 28 December 2023, Application No. 201741003692.
4. S. Suresh Kumar, S. Abinauv, T. Amutha Geethan, K. Balaji, and S. Deepak, “Development of Car Stability Control Mechanism for Tyre Blowout Situation,”Indian Patent No. 475811, Granted on 30 November 2023, Application No. 202141017152.

Theme2: Sustainable Manufacturing and Circular Economy

1. Annamalai, S. S. Suresh Kumar, and P. Sabarinathan, “Method of Recovering Abrasives from Bonded Rejects and Method of Reusing the Same,”Indian Patent No. 491700, Granted on 29 December 2023, Application No. 202141018692.
2. Annamalai, S. S. Suresh Kumar, P. Sabarinathan, R. Balakrishnan, and A. C. Kuriakose, “Portable Size Conversion Machine for Coated Abrasive Discs,”Indian Patent No. 487381, Granted on 22 December 2023, Application No. 202141018693.
3. S. Suresh Kumar, R. Damodaram, M. B. Adithiya, R. Deepak Babu, K. M. Dhilip, and V. U. Karthik, “Natural Fiber Laying Attachment for Green Concrete Paver Block (GCPB) Making Machine,”Indian Patent No. 534516, Granted on 23 April 2024, Application No. 202241003717.

Theme 3: Agricultural Innovation

1. S. Suresh Kumar, E. Shoba, S. K. Shriram, G. R. Varuna, and S. Venkatesh, “Innovative Self-Adjustable Support for Soft Stem Trees to Avoid Cyclone Damage,”Indian Patent No. 538054, Granted on 15 May 2024, Application No. 202141040129.

Awards

• Secured University Fourth Rankin the Postgraduate (PG) degree programme.
• Received the Best Paper Awardfor the paper titled “Estimation of Mixed-Mode Stress Intensity Factor and Interaction Behaviour of Surface Cracks in a Rectangular Bar” presented at an International Conference.
• Received the Best Innovation Center Award from ‘VALEO Chennai’in recognition of innovation and research contributions.
• The R&D project titled “Ballistic Performance of Aluminium (Al 7075) and Magnesium (AZ31B) Targets for Lightweight Defence Vehicles” received the First Consolation Prizewith a cash award of ₹5,000 at the Industry–Institute Forum, IMTEX 2018.
• Faculty Mentor for Team SpaceKidz India, comprising students from SSN College of Engineering, which successfully qualified for and participated in the NASA Human Exploration Rover Challenge 2018(Huntsville, Alabama, USA). The team was one of only four teams representing India at the international competition.
• Guided the student team of Mr. D. Roshan Ram Dayal and Mr. Pydipati Praneeth Kumar, who presented their research innovation titled “Carbon Nano Tubes and Magneto Rheological Fluid Based Vibration Absorbing & Deflecting Pads” at ELGi Technology Day 2019, Coimbatore (15 December 2019), and received a Certificate of Appreciation and prizes for their outstanding innovation.
• Received appreciationfrom the Intellectual Property Office, Chennai, under the National Intellectual Property Awareness Mission (NIPAM), Government of India, for successfully organizing an Intellectual Property Rights (IPR) Awareness Programme on 11 April 2022.
• Received a Certificate of Appreciationfrom the Academy of Indigenous Motor Sports (AIMS) for serving as the Faculty Mentor to Team APEX Racing, SSN College of Engineering, at the National-Level Season-03 Kart Racing Championship held at Kari Motor Speedway, Coimbatore (26–29 February 2024).
• Faculty Mentor,Team APEX Racing, SSN College of Engineering, for participation in the Indian Karting Race (IKR) 2024, a national-level Go-Kart design and racing competition held at Greater Noida, Uttar Pradesh.
• Guided Team OPTIPICK (Mr. Rishivanth Madhavan, Ms. Riya Menon, and Mr. Pranav Prasad, Third Year Mechanical Engineering) to win First Place at the Caterpillar Tech Challenge 2026 for developing the Thermal Runaway Risk Index (TRRI), an innovative solution for assessing battery thermal runaway risk.
• Received the Best Faculty Awardfrom SSN Management for the academic years 2019–2020, 2021–2022, and 2022–2023 in recognition of excellence in teaching, research, and academic contributions.
• Department Coordinator, Department of Mechanical Engineering, Shiv Nadar University Chennai, from 16 July 2026 onwards, responsible for coordinating academic and administrative activities.
• Co-Principal Investigator, SAJAY – Centre of Excellencein Prosthetics and Orthotics, Shiv Nadar University Chennai, funded project (2025–2028), contributing to the development of the STRIDE ASSIST™ Device for assistive and rehabilitation applications.
• Serving as the Institute Intellectual Property Rights (IPR) Coordinatorsince 2020, leading patent awareness, coordinating patent filing and prosecution activities, facilitating innovation initiatives, and promoting intellectual property creation among faculty members and students.
• Served as the Institute Coordinator and Single Point of Contact (SPOC) for the KAPILA Scheme at SSN College of Engineering, successfully coordinating patent reimbursement claims and facilitating the receipt of financial support from the Ministry of Education for patent filing activities.x

Area of Research

• Metal Fatigue:Low Cycle Fatigue (LCF), High Cycle Fatigue (HCF), corrosion fatigue, fatigue crack initiation and propagation, fatigue life estimation, and durability assessment of engineering components under cyclic loading.
• Fracture Mechanics:Linear Elastic Fracture Mechanics (LEFM), Elastic–Plastic Fracture Mechanics (EPFM), Extended Finite Element Method (XFEM), crack initiation and propagation and structural integrity assessment.
• Computational Solid Mechanics:Constitutive material modelling, nonlinear material behaviour, damage mechanics, failure prediction, numerical modelling of metallic materials, and computational analysis of engineering structures.
• Crash Simulation and Impact Dynamics:Numerical simulation of automotive crashworthiness, occupant safety, energy absorption mechanisms.
• Finite Element Analysis (FEA):Linear and nonlinear finite element modelling using implicit and explicit solvers, transient dynamic analysis, contact mechanics, thermo-mechanical analysis, fluid–structure interaction (FSI), and multi-physics simulations for engineering applications.
• Ballistic Impact Analysis:Numerical and experimental investigation of ballistic impact behaviour of metallic and composite materials.
• Underwater Shock (UNDEX) Analysis:Computational modelling and simulation of underwater explosion (UNDEX) loading on naval structures.
• New Product Innovation through Design Thinking: Application of Design Thinking methodologies for user-centric product innovation.

1.Research Guidance

Ph.D. Guidance: Completed – 04

2.Teaches: Theory courses

• Engineering Graphics,
• Kinematics of Machines
• Design of Machine Elements
• Dynamics of Machines (Theory and lab)
• Design of Transmission systems
• Finite Element Analysis (Theory and simulation lab)
• Design Concepts in Engineering
• Computer Aided Product Design
• IoT in Manufacturing
• Maintenance Engineering
• CAD/CAM Lab

Links

Google Scholar : https://scholar.google.com/citations?hl=en&user=xDQCvm4AAAAJ&view_op=list_works&sortby=pubdate

Scopus Author ID : https://www.scopus.com/pages/feedback/author/review-profile?authorIds=57408122100

ORCID : https://orcid.org/0000-0001-6557-2016

LinkedIn : https://www.linkedin.com/in/dr-suresh-kumar-sundaram-b384b8106/